Windows PE 1.0
return to Plugins list
Windows PE 1.0 1 http://www.microsoft.com/ |
---|
Contents
Information
ERPXE Module
- Name: - Windows PE 1.0
- Version: 1
- Official website: http://www.microsoft.com/
- License: Proprietary software
- Wikpedia Page: http://en.wikipedia.org/wiki/Windows_pe
- Download: http://www.erpxe.com/downloads
Plugin type
Windows PE 1.0 | Anti-Virus | Deployment | Diagnostics | OS Installation | Live Media | Recovery Tools |
---|---|---|---|---|---|---|
Optional | Optional | Optional | Optional | Yes | Optional |
Plugin Requirments
Windows PE 1.0 | CIFS | HTTP | Internet | NFS | Linux OS | Windows OS |
---|---|---|---|---|---|---|
No | No | No | No | Yes | Yes |
Screen Shots
Special Information
Windows Preinstallation Environment (aka Windows PE, WinPE 1.0) is a lightweight version of Windows XP, Windows Server 2003 that is used for the deployment of workstations and servers.
It is intended as a 32-bit replacement for MS-DOS during the installation phase of Windows, and can be booted via PXE, CD-ROM, USB flash drive, or hard disk.
WinPE allows you to install any version of windows using a Windows Share (or SAMBA) of your Windows Installation files.
Installation Instructions
You can add up to 3 different WinPEs without editing the menu. Just replace 'a' with 'b' or 'c' and 'winna' with 'winnb' or 'winnc' accordingly.
First we will have to make the boot loaders - unfortunately we can't distribute these files without violating Microsoft Legal Policy so you'll have to make them yourself.
- Copy startrom.n1_ , ntdetect.com , setupldr.ex_ to /tftpboot from the Windows Server 2003 SP1 - i386 folder. - Expand startrom.n1_ startrom.0 - Open startrom.0 in an HEX editor (HxD for example) - Replace 'ntldr' with 'win\(a or b or c)' at: 5A57,5A82,5F8B, (3 times - CASE SENSITIVE!) - Move startrom.0 to /tftpboot/er/plugins/(winna or winnb or winnc)/ - Expand setupldr.ex_ (a or b or c) - Open (a or b or c) in an HEX editor (HxD for example) - Replace 'winnt.sif' with 'win\(a or b or c).sif' at: 254E6, 254F2, 255C2, 2563E, 257FE, 2580A, 3C7AB, 3C7Cf, 3C7F2 (9 times - CASE SENSITIVE!) - Move (a or b or c) to /tftpboot/win/
In order to run Windows PE 1.0 from PXE you need to create an image file.
Image file type can be ISO or SDI.
We will use SDI image file because it can be compressed using NTFS compression for a shorter loading time.
In order to use ISO files instead you will need to edit /tftpboot/win/ (a or b or c).sif and change 'SDI' to 'ISO', Change '/rdimageoffset=36352' to '/rdexportascd'
Download {{{filename}}} to /
https://sourceforge.net/projects/erpxe/files/plugins/
extract {{{filename}}} file:
tar -xvzf {{{filename}}}
You can use BarPE to create the actual Windows PE. When using BartPE it is recommended to use Windows Server 2003 SP1 and above or you'll need to replace ramdisk.sys
In order to replace ramdisk.sys:
- Copy http://www.nu2.nu/pebuilder/ output into SDI image file. - Copy ramdisk.sy_ to /tftpboot from the Windows Server 2003 SP1 - i386 folder. - Expand ramdisk.sy_ ramdisk.sys - Move and Replace /tftpboot/ramdisk.sys to i386/system32/drivers/ramdisk.sys
Verify files with filelist.txt in each folder.
All Done!